Double Post Inground Lift L4800(;;E);; Equipped With B

Double Post Inground Lift L4800(;;E);; Equipped With B

Double Post Inground Lift L4800(;;E);; Equipped With B

¥7777

It is equipped with a bridge-type supporting arm, and both ends are equipped with a passing bridge to lift the skirt of the vehicle, which is suitable for a var

Introduction

The maximum lifting weight is 3500kg, which is suitable for lifting during vehicle overhaul.
The main unit is buried underground, the design is compact, and the foundation construction work surface is small, saving basic investment.
It is equipped with a bridge-type supporting arm, and both ends are equipped with a passing bridge to lift the skirt of the vehicle, which is suitable for a variety of wheelbase models. The skirt of the vehicle is in full contact with the lift pallet, making the lifting more stable.
The pallet is made of steel pipe and steel plate after bending, the structure is considered, and the lifting is more stable.
According to user needs, after the equipment returns, the support arm can be designed in two parking methods: 1. Falling on the ground; 2. Sinking into the ground, the upper surface of the support arm is flush with the ground, and the ground is more beautiful.
The simple structure design ensures that the overall operating environment is open and smooth when the vehicle is lifted for maintenance.
Equipped with a rigid synchronization system to ensure the synchronization of the lifting of the two lifting post. After the equipment is debugged and determined, it is no longer necessary to repeat the leveling for normal use.
Equipped with mechanical lock and hydraulic safety device, safe and stable.
Equipped with the highest limit switch to prevent misoperation from causing the vehicle to rush to the top.
L4800(E) has obtained CE certification

Technical Parameters

Lifting capacity 3500kg
Load sharing max. 6:4 ior against drive-odirection
Max. Lifting height1850mm
Entire Lifting (Dropping)Time40-60sec
Supply voltageAC380V/50Hz(Accept customization
Power2 Kw
The pressure of the air source0.6-0.8MPa
N.W.1300 kg
Post diameter140mm
Post thickness14mm
Capacity of oil tank12L


Related products