Double Post Inground Lift L4800(;A); Carrying 3500kg

Double Post Inground Lift L4800(;A); Carrying 3500kg

Double Post Inground Lift L4800(;A); Carrying 3500kg

¥55

Equipped with a telescopic rotatable support arm to lift the skirt of the vehicle. The center distance between the two lifting post is 1360mm, so the width o

Introduction

It is suitable for lifting cars and SUVs with a weight less than 3500kg.Suitable for vehicle maintenance operations.
The center distance between the two lifting post is 1360mm, so the width of the main unit is small, and the amount of equipment foundation excavation is small, which saves basic investment.
After the vehicle is lifted, the surrounding and upper spaces are completely open, and the bottom part is less obscured, and maintenance operations are convenient. The workshop environment is clean and standard.
Equipped with a telescopic rotatable support arm to lift the skirt of the vehicle. The lifting range is large and can be adapted to 80% of the models on the market.
The supporting arm is welded by steel pipe and steel plate, which has high mechanical strength.
The main unit is made by welding steel pipe and steel plate.
The built-in rigid synchronization system ensures that the lifting movements of the two lifting posts are absolutely synchronized, and there is no leveling between the two posts after the equipment is debugged.
Equipped with mechanical and hydraulic safety devices.
Equipped with the highest limit switch to prevent misoperation from causing the vehicle to rush to the top.
L4800(A) has obtained CE certification.

Technical Parameters

Lifting capacity3500kg
Load sharingmax. 6:4 ior against drive-odirection
Max. Lifting height1850mm
Entire Lifting (Dropping)Time40-60sec
Supply voltageAC380V/50Hz(Accept customization
Power3 Kw
The pressure of the air source0.6-0.8MPa
N.W.1280 kg
Post diameter140mm
Post thickness14mm
Capacity of oil tank12L

L4800 (1)

L4800 (1)


Related products