Single Post Inground Lift L2800(;;F-2);; Suitable For

Single Post Inground Lift L2800(;;F-2);; Suitable For

Single Post Inground Lift L2800(;;F-2);; Suitable For

¥554

It is equipped with a 4m long bridge plate pallet to lift the tires of the vehicle to meet the needs of long-wheelbase vehicles. Vehicles with a shorter wheelba

Introduction

The whole set of equipment is composed of three parts: main unit, supporting arm and electric control cabinet.
It adopts electro-hydraulic drive.
The out cover of the main machine is a Ø475mm spiral welded pipe, which is buried underground, the whole machine does not take up space.
During non-working hours, the lifting post will fall back to the ground, and the supporting arm will be level with the ground. The ground is clean and safe. You can do other work or store other items. It is suitable for installation in small repair shops and home garages.
It is equipped with a 4m long bridge plate pallet to lift the tires of the vehicle to meet the needs of long-wheelbase vehicles. Vehicles with a shorter wheelbase should be parked in the middle of the pallet length to prevent front and rear unbalanced loads. The pallet is inlaid with the grille, which has good permeability, which can thoroughly clean the chassis of the vehicle and also take care of the vehicle maintenance.
Equipped with electric control cabinet , the control system adopts 24V safety voltage to ensure personal safety.
Equipped with mechanical and hydraulic safety devices,safe and stable.When the equipment rises to the set height, the mechanical lock is automatically locked, and personnel can safely perform maintenance operations. The hydraulic throttling device, within the maximum lifting weight set by the equipment, not only guarantees a faster ascent speed, but also ensures that the lift slowly descends in the event of mechanical lock failure, oil pipe bursting and other extreme conditions to avoid sudden rapid speed fall causing a safety accident.

Lifting capacity3500kg
Load sharingmax. 6:4 in or against drive-on direction
Max. Lifting height1750mm
Raising/Lowering Time  40/60sec
Supply voltageAC220/380V/50 Hz(Accept customization)
Power 2.2 kw
Post diameter195mm
Post thickness15mm
The pressure of the air source0.6-0.8MPa
Capacity of oil tank8L


Related products